Wilkerson L50 User Manual download pdf

83-301-000-FL 8/99

Printed in the U.S.A.

NNR=NOT NORMALLY REPLACED

WARNING

DO NOT PLACE PLASTIC BOWL UNIT IN SERVICE

WITHOUT METAL BOWL GUARD INSTALLED

Plastic bowl units are sold only with metal bowl guards. To minimize the danger of flying fragments in

the event of plastic bowl failure, the metal bowl guards should not be removed. If the unit is in service

without the metal bowl guard installed, manufacturer's warranties are void, and the manufacturer

assumes no responsibility for any resulting loss.

IF UNIT HAS BEEN IN SERVICE AND DOES NOT HAVE A METAL BOWL GUARD, ORDER ONE

AND INSTALL BEFORE PLACING BACK IN SERVICE..

C A U T I O N

Certain compressor oils, chemicals, household cleaners, solvents, paints and fumes will attack plastic

bowls and can cause bowl failure. Do not use near these materials. When bowl becomes dirty replace

bowl or wipe only with clean, dry cloth. Reinstall metal bowl guard or buy and install a metal bowl guard.

Immediately replace any crazed, cracked, damaged or deteriorated plastic bowl with a metal bowl or a

new plastic bowl and metal bowl guard.

SOME OF THE MATERIALS THAT WILL ATTACK

POLYCARBONATE PLASTIC BOWLS.

Acetaldehyde Chlorobenzene Methylene chloride

Acetic acid (conc.) Chloroform Methylene salicylate

Acetone Cresol Milk of lime (CaOH)

Acrylonitrile Cyclohexanol Nitric acid (conc.)

Ammonia Cyclohexanone Nitrobenzene

Ammonium flouride Cyclohexene Nitrocellulose lacquer

Ammonium hydroxide Dimethyl formamide Phenol

Ammonium sulfide Diozane Phosphorous hydroxy

Anaerobic adhesives Ethane tetrachloride chloride

and sealants Ethyl acetate Phosphorous trichloride

Antifreeze Ethyl ether Propionic acid

Benzene Ethylamine Pyridine

Benzoic acid Ethylene chlorohydrin Sodium hydroxide

Benzyl alcohol Ethylene dichloride Sodium sulfide

Brake fluids Ethylene glycol Styrene

Bromobenzene Formic acid (conc.) Sulfuric acid (conc.)

Butyric acid Freon (refrig. & propell.) Sulphural chloride

Carbolic acid Gasoline (high aromatic) Tetrahydronaphthalene

Carbon disulfide Hydrazine Tiophene

Carbon tetrachloride Hydrochloric acid (conc.) Toluene

Caustic potash solution Lacquer thinner Turpentine

Caustic soda solution Methyl alcohol Xylene

Perchlorethylene

and others

TRADE NAMES OF SOME COMPRESSOR OILS, RUBBER COMPOUNDS AND

OTHER MATERIALS THAT WILL ATTACK POLYCARBONATE PLASTIC BOWLS.

Atlas "Perma-Guard" National Compound #N11

Buna N "Nylock" VC-3

Cellulube #150 and #220 Parco #1306 Neoprene

Crylex #5 cement *Permabond #910

*Eastman 910 Petron PD287

Garlock #98403 (polyurethane) Prestone

Haskel #568-023 Pydraul AC

Hilgard Co.'s hil phene Sears Regular Motor Oil

Houghton & Co. oil #1120. #1130 & #1055 Sinclair oil "Lily White"

Houtosafe 1000 Stauffer Chemical FYRQUEL #150

Kano Kroil Stillman #SR 269-75 (polyurethane)

Keystone penetrating oil #2 Stillman #SR 513-70 (neoprene)

*Loctite 271 Tannergas

*Locite 290 Telar

*Loctite 601 Tenneco anderol #495 & #500 oils

Loctite Teflon-Sealant Titon

Marvel Mystery Oil *Vibra-tite

Minn. Rubber 366Y Zerex

*When in raw liquid form.

WE CANNOT POSSIBLY LIST ALL HARMFUL SUBSTANCES, SO CHECK WITH MOBAY

CHEMICAL OR THE GENERAL ELECTRIC OFFICE FOR FURTHER INFORMATION ON

POLYCARBONATE PLASTIC.

C A U T I O N

E X C E P T as otherwise specified by the manufacturer, this product is specifically designed for

compressed air service, and use with any other fluid (liquid or gas) is a misapplication. For example,

use with or injection of certain hazardous liquids or gases in the system (such as alcohol or liquid

petroleum gas) could be harmful to the unit or result in a combustible condition or hazardous

external leakage. Manufacturer's warranties are void in the event of misapplication, and

manufacturer assumes no responsibility for any resulting loss. Before using with fluids other than air,

or for non-industrial applications, or for life support systems consult manufacturer for written

approval.

(see reverse side for Installation and Maintenance Instructions)

BODY

NNR

METAL BOWL

ASSEMBL Y

TRANSPARENT

PLASTIC BOWL

CLAMP RING

ASSEMBLY NNR

PETCOCK

(For Metal

Bowls only)

BOWL

GUARD

BOWL O-RING

SIPHON TUBE

ADAPTER

O-RING

BALL

CHECK

VALVE

ADJUSTING

SCREW

O-RING

FORCE-FILL

ADAPTER KIT

FILL PLUG

SIGHT DOME

RETAINING SCREW

AND O-RING NNR

(For Plastic Petcock

Knob)

O-RING

TAMPER-RESISTANT

KIT (Optional)

NUT

NNR

PLASTIC

PETCOCK KNOB

NNR

(Optional with

Plastic Bowl)

SIGHT

GAUGE

(See Reverse

Side for Parts

Breakdown)

ADAPTER

NNR

GASKET

NUT

(1 Required)

TURN

PRESS

SCREW

(6 Required)

FLOW-GUIDE®

VARIABLE

ORIFICE

I N S TA L L ATION AND

MAINTENANCE SHEET

Lubricator Model L50

with Variations and Accessories

OPERATIONS

1 2

Summary of Contents

Page 1 - MAINTENANCE SHEET

83-301-000-FL 8/99Printed in the U.S.A.NNR=NOT NORMALLY REPLACEDWARNINGDO NOT PLACE PLASTIC BOWL UNIT IN SERVICEWITHOUT METAL BOWL GUARD INSTALLEDPlas

Page 2 - SIGHT GAUGE KIT

INSTALLATION1.Refer to the warning on front page.2.Install as close as possible to the equipment requiring lubrication.3.Install the unit with the air

Comments to this Manuals

No comments

Wilkerson L50 User Manual

Browse online or download User Manual for Hardware Wilkerson L50. Wilkerson L50 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Wilkerson L50